Early Champion 170 flathead
1941–early postwar eraAbout 80 hp in documented 1941 form
Economy six that helped establish the Champion line
Studebaker 169.6 Champion Six enginePhoto: Mr.choppers · CC BY-SA 3.0
Studebaker · Champion Inline-Six
Studebaker 169.6 Champion Six
The economical long-stroke flathead six that powered Studebaker's high-volume Champion line.
169.6
Cubic inches
The Champion six was Studebaker's economy engine for more than two decades. Its 3.00 x 4.00-inch long-stroke layout prioritized low-speed torque, simplicity and fuel economy rather than performance.
Key variants
All variantsEarly Champion 170 flatheadLate Champion/Econ-O-Miser 170
Displacement
169.6 ci
Bore
3"
Stroke
4"
Years
1939–1960 flathead Champion family era
Key Takeaway
The 169.6 Champion used a simple L-head inline-six with a narrow 3.00-inch bore and very long 4.00-inch stroke. Its cast-iron side-valve layout emphasized low-speed torque, simplicity, and fuel economy rather than airflow or high-rpm power.
Technical Specifications
- Compression
- 7.0:1 standard / 7.5:1 optional in documented 1953 specification
- Horsepower
- 80 hp in documented 1941 form; 85 hp @ 4000 rpm in documented 1953–1954 form
- Torque
- 138 lb-ft in documented 1953–1954 specification
- Architecture
- Inline six-cylinder L-head / side-valve
- Block
- Cast iron
- Cylinder heads
- Cast iron
- Valvetrain
- Side-valve L-head
- Aspiration
- Naturally aspirated
- Fuel delivery
- Single-barrel carburetor
- Firing order
- 1-5-3-6-2-4
- Main bearings
- 4 in documented early-1950s specification
The 169.6 Champion used a simple L-head inline-six with a narrow 3.00-inch bore and very long 4.00-inch stroke. Its cast-iron side-valve layout emphasized low-speed torque, simplicity, and fuel economy rather than airflow or high-rpm power.
Internal Specifications
Variant-specific values are labeled. Engine families that span multiple years or RPOs can have different heads, cams, induction and rotating parts, so the exact code/year always takes priority.
Identification & Output
- Engine codes / RPO
- Champion 170 flathead engine-number family; engine number is stamped at the left-front of the block below the head, with year-specific sequences such as 3G/4G/5G/6G-era Champion production
- Casting numbers
- No single casting number is treated as universal for the 1939–1960 Champion 169.6 family; identify by engine number, 3.00 x 4.00-inch dimensions, head/block date and flathead architecture.
- Power rating
- Period brake horsepower / SAE gross-era rating
- Horsepower RPM
- 80 hp in documented 1941 form; 85 hp @ 4000 rpm in documented 1953–1954 form
- Torque RPM
- 138 lb-ft @ 2400 rpm in documented 1953 specification
Operating Specs
- Production notes
- The Champion flathead grew to 169.6 cid for 1941 and remained one of Studebaker’s longest-lived engine designs. By the early 1950s it was rated around 85 hp and continued through the 1960 model year before the OHV redesign.
Compatibility Notes
- Flathead 169.6 parts should be matched by year and engine number; head chamber, carburetor, distributor, front-drive and truck/passenger-car hardware vary.
- Do not confuse this engine with the 1961–1964 OHV 170. Displacement is essentially the same, but cylinder head, valvetrain, manifolds, oiling and cooling details are different.
Notable Applications
Studebaker ChampionStudebaker StarlightStudebaker StarlinerStudebaker Conestoga
Strengths
- Simple durable flathead design
- Good low-rpm torque for size
- Strong parts/restoration knowledge base
Weaknesses / Watch-outs
- Flathead airflow limits power
- Fiber cam timing gear wear can mimic bottom-end knock
- Very long stroke discourages high-rpm use
Common Upgrades
- Electronic ignition conversion
- Carburetor restoration
- Exhaust and cooling-system refresh
Racing History & Legacy
The Champion 169.6 was engineered primarily for economy and durability rather than a factory high-performance campaign. Studebaker’s better-documented competition push came later with the V8/R-series program, so the flathead six is best treated as the company’s lightweight economy foundation rather than a headline race engine.
The 169.6 flathead became one of Studebaker's most familiar economy engines before the OHV redesign.
References & Image Credit
Engine image: Mr.choppers · CC BY-SA 3.0 · source
Hemmings — 1953–54 Champion engine specs
period spec
Studebaker Drivers Club — 1941 Champion specifications
club reference
Studebaker Drivers Club — Studebaker six-cylinder engine history
club technical history
Wikimedia Commons — 1951 Studebaker Econ-O-Miser 170 flathead six
licensed media
Studebaker Drivers Club — six-cylinder engine-number reference
club identification reference
1953 Studebaker Champion specifications
period spec
Key Factory / Build Variants
Late Champion/Econ-O-Miser 170
1950s–196085 hp @ 4000 rpm representative
Final flathead evolution before the OHV conversion
Engineering Notes Worth Knowing
01
169.6 cu in / 2.8 L with 3.00 x 4.00-inch bore and stroke.
02
Cast-iron L-head inline-six.
03
Single-barrel carburetion.
04
Documented early-1950s output: about 85 hp and 138 lb-ft.
History · context · related reading
The Story Behind Studebaker 169.6 Champion Six
The Champion six was built around economy and durability. It powered lightweight Studebakers for more than two decades and became one of the company's most familiar engines before the switch to overhead valves.
TorqueList Garage Reference Series
See this engine inside the full Studebaker reference catalog.
The same Engine Library data now powers a more detailed mobile-friendly catalog with technical specs, variants, engineering notes, history and related stories.